USD
GBP
CAD
AUD
EUR
NZD
SGD
Portable Hydrogen Water Bottle
$129.00 USD
Enjoy freshly prepared hydrogen-rich water at home, at your desk or on the go.This 350mL rechargeable hydrogen water bottle combines a sleek, square design with a 3000mAh battery. Choose a 5- or 10-minute cycle with simple button controls, and check cycle timing and battery status on the monochrome display. A manual pressure-release valve and a dedicated 3-minute backflush cycle simplify everyday use and cleaning. Available in Gunmetal, Blue and Light Pink.
Shipping
View shipping options and estimated delivery times at checkout.
90-Day Returns
Shop with a 90-day return window, subject to our return policy.
1-Year Warranty
Your bottle includes a 1-year warranty. Contact us for warranty support.
Description
Personal capacity
Rechargeable battery
Generation cycles
Backflush cleaning
Generation Modes & Hydrogen Output
Choose between two hydrogen-generation cycles: 5 minutes for an estimated 2500+ ppb, or 10 minutes for 5000+ ppb dissolved hydrogen. Select your preferred cycle using the control button.
Explore the Button Actions
Select a mode below to see the cycle time and button instructions.
Press the control button once to start a 5-minute hydrogen-generation
cycle. Choose this mode when you have less time.
To stop the cycle early, press the button once more.
Press twice consecutively to start a 10-minute
hydrogen-generation cycle. Press again during
generation to stop early.
Add water and tighten the lid, then hold the button
for 3 seconds to start backflush cleaning.
The cycle stops automatically after 3 minutes.
Discard the cleaning water and rinse the bottle.
Design, Display & Controls
Manual Pressure Release
The valve on the lid gives you a dedicated pressure-release step before opening after hydrogen generation.
Button Control
A physical button beside the display controls generation and cleaning. Refer to the mode guide above for the button actions.
PC Bottle Body
The bottle body is made from PC. Product details are shown in Gunmetal, with Blue and Light Pink also available.
How to Use Your Hydrogen Water Bottle
First-Time Preparation
Before first use, add purified water or boiled water that has cooled, and soak the membrane for approximately 24 hours. After soaking, discard the water and refill with fresh drinking water before normal use.
Your Daily Routine
1. Add drinking water without overflowing the bottle. Do not run the bottle empty.
2. Secure the lid.
3. Press once for 5 minutes or twice consecutively for 10 minutes.
4. After generation, press the pressure-release valve before opening the lid.
How to Clean and Care for Your Hydrogen Water Bottle
Weekly Backflush Cleaning
Clean your bottle about once a week. Add water, tighten the lid and hold the button for 3 seconds. The backflush cycle stops automatically after 3 minutes. Discard the water and rinse before use.
Keeping the Membrane Moist
Between uses, keep enough water in the bottle to cover the electrolysis cell. Change this water every 3 days and replace it with fresh drinking water before use.
Water at the Base
The base may occasionally release small amounts of water. Simply wipe it dry with a soft cloth when this occurs.
Know the Size Before You Choose
350mL in a Tall, Square Format
Approximately 215 × 85 × 45mm (height × width × depth), with a weight of approximately 460g. Use these measurements to check your desk space or bag compartment.
At Your Desk
Prepare a cycle during a break and keep the controls within easy reach. Allow for the selected generation time before drinking.
Technical Specifications
| Specification | Details |
|---|---|
| Capacity | 350 mL |
| Battery Capacity | 3000 mAh rechargeable battery |
| Display | Monochrome display with cycle timing and battery status |
| Controls | Physical button |
| Hydrogen-Generation Cycles | 5 minutes — press once 10 minutes — press twice consecutively |
| Early Stop | Press once during hydrogen generation to stop the cycle |
| Cleaning Cycle | 3-minute backflush with automatic stop |
| Cleaning Activation | Hold the button for 3 seconds |
| Pressure Release | Manual pressure-release valve on the lid |
| Bottle Body Material | Polycarbonate (PC) |
| Dimensions | Approx. 215 × 85 × 45 mm (H × W × D) |
| Weight | Approx. 460 g |
| Available Colors | Gunmetal, Blue, Light Pink |
| First-Use Preparation | Soak the membrane for approximately 24 hours, then replace the water |
Product Evidence & Documents
What’s Included
-
350mL Hydrogen Water Bottle × 1
- Charging Cable × 1
- User Manual × 1
- Presentation Box × 1
- Power Adapter × 1
- A power adapter suitable for your delivery destination is included.
Frequently Asked Questions
Yes. Press the button again during a hydrogen-generation cycle to stop it early.
Yes. Soak the membrane for approximately 24 hours using purified water or boiled water that has cooled. Discard that water and refill before normal use.
No. The screen provides operating information such as cycle timing and battery status; it is not a live dissolved-hydrogen meter.
Keep water covering the electrolysis cell and replace it every 3 days. Use fresh drinking water when you return to normal use.
Press the manual pressure-release valve before opening the lid after hydrogen generation.
PPB stands for parts per billion. Here, it describes the concentration of hydrogen dissolved in the water, rather than the total volume of gas produced.
Reviews (0)
Be the first to review “Portable Hydrogen Water Bottle”
You must be logged in to post a review.
Reviews
There are no reviews yet.